Note that, perf does allow measuring more than 2 PERF_TYPE_HW_CACHE events at the same time, the exception being the measurement of LLC-cache events.
The expectation is that, when there are 4 general-purpose and 3 fixed-purpose
hardware counters, 4 HW cache events (which default to RAW events) in perf can be measured without multiplexing, with hyper-threading ON.
sudo perf stat -e L1-icache-load-misses,L1-dcache-stores,L1-dcache-load-misses,dTLB-load-misses sleep 2
Performance counter stats for 'sleep 2':
26,893 L1-icache-load-misses
98,999 L1-dcache-stores
14,037 L1-dcache-load-misses
723 dTLB-load-misses
2.001732771 seconds time elapsed
0.001217000 seconds user
0.000000000 seconds sys
The problem appears when you try to measure events targeting the LLC-cache. It seems to be measuring only 2 LLC-cache specific events, concurrently, without multiplexing.
sudo perf stat -e LLC-load-misses,LLC-stores,LLC-store-misses,LLC-loads sleep 2
Performance counter stats for 'sleep 2':
2,419 LLC-load-misses # 0.00% of all LL-cache hits
2,963 LLC-stores
<not counted> LLC-store-misses (0.00%)
<not counted> LLC-loads (0.00%)
2.001486710 seconds time elapsed
0.001137000 seconds user
0.000000000 seconds sys
CPUs belonging to the skylake/kaby lake family of microarchitectures and some others, allow you to measure OFFCORE RESPONSE events. Monitoring OFFCORE_RESPONSE events requires programming extra MSRs, specifically, MSR_OFFCORE_RSP0 (MSR address 1A6H) and MSR_OFFCORE_RSP1 (MSR address 1A7H), in addition to programming the pair of IA32_PERFEVTSELx and IA32_PMCx registers.
Each pair of IA32_PERFEVTSELx and IA32_PMCx register will be associated with one of the above MSRs to measure LLC-cache events.
The definition of the OFFCORE_RESPONSE MSRs can be seen here.
static struct extra_reg intel_skl_extra_regs[] __read_mostly = {
INTEL_UEVENT_EXTRA_REG(0x01b7, MSR_OFFCORE_RSP_0, 0x3fffff8fffull, RSP_0),
INTEL_UEVENT_EXTRA_REG(0x01bb, MSR_OFFCORE_RSP_1, 0x3fffff8fffull, RSP_1),
........
}
0x01b7 in the INTEL_UEVENT_EXTRA_REG call refers to event-code b7 and umask 01. This event code 0x01b7 maps to LLC-cache events, as can be seen here -
[ C(LL ) ] = {
[ C(OP_READ) ] = {
[ C(RESULT_ACCESS) ] = 0x1b7, /* OFFCORE_RESPONSE */
[ C(RESULT_MISS) ] = 0x1b7, /* OFFCORE_RESPONSE */
},
[ C(OP_WRITE) ] = {
[ C(RESULT_ACCESS) ] = 0x1b7, /* OFFCORE_RESPONSE */
[ C(RESULT_MISS) ] = 0x1b7, /* OFFCORE_RESPONSE */
},
[ C(OP_PREFETCH) ] = {
[ C(RESULT_ACCESS) ] = 0x0,
[ C(RESULT_MISS) ] = 0x0,
},
},
The event 0x01b7 will always map to MSR_OFFCORE_RSP_0, as can be seen here. The function, specified above, loops through the array of all the "extra registers" and associates the event->config(which contains the raw event id) with the offcore response MSR.
So, this would mean only one event can be measured at a time, since only one MSR - MSR_OFFCORE_RSP_0 can be mapped to a LLC-cache event. But, that is not the case!
The offcore registers are symmetric in nature, so when the first MSR - MSR_OFFCORE_RSP_0 register is busy, perf uses the second alternative MSR, MSR_OFFCORE_RSP_1 for measuring another offcore LLC event. This function here helps in doing that.
static int intel_alt_er(int idx, u64 config)
{
int alt_idx = idx;
if (!(x86_pmu.flags & PMU_FL_HAS_RSP_1))
return idx;
if (idx == EXTRA_REG_RSP_0)
alt_idx = EXTRA_REG_RSP_1;
if (idx == EXTRA_REG_RSP_1)
alt_idx = EXTRA_REG_RSP_0;
if (config & ~x86_pmu.extra_regs[alt_idx].valid_mask)
return idx;
return alt_idx;
}
The presence of only 2 offcore registers, for Kaby-Lake family of microrarchitectures hinder the ability to target more than 2 LLC-cache event measurement concurrently, without any multiplexing.
