hi guys im working with a screen and sound update for bitlash
My arduino unos connection:
Mirrors RX = 6 TX = 7 hardware/software serial connected extras for bitlash:
void loop() {
while (Serial.available()) {
delay(2); //delay to allow byte to arrive in input buffer
char c = Serial.read();
readString += c;
}
if (readString.length() >0) {
Serial.println(readString);
tft.print(readString);
if (readString.startsWith("RECTSH"))
{
Serial.println(readString.substring(23, 28));
tft.fillRect(readString.substring(7, 10).toInt() , readString.substring(11, 14).toInt() , readString.substring(15, 18).toInt(), readString.substring(19, 22).toInt(), readString.substring(23, 28).toInt());
tft.drawRect(readString.substring(7, 10).toInt() , readString.substring(11, 14).toInt() , readString.substring(15, 18).toInt(), readString.substring(19, 22).toInt(), readString.substring(23, 28).toInt());
}
if (readString.startsWith("CIRCSH"))
{
tft.fillCircle(readString.substring(7, 10).toInt() , readString.substring(11, 14).toInt() , readString.substring(15, 18).toInt(), readString.substring(19, 24).toInt());
}
if (readString.startsWith("BITMAP"))
{
drawBitmap(readString.substring(7, 10).toInt() , readString.substring(11, 14).toInt() , readString.substring(15, 18).toInt(), readString.substring(19, 22).toInt(), Bitmap1);
}
Mirror Code
void setup() {
Serial.begin(115200);
//Serial.begin(9600);
Serial.write('B');
}
void loop() {
if (Serial.available() > 0) {
Serial.write(Serial.read());
}
}
when i print what i got from bitlash one, test word is basically doesnt stop and i didnt even say