I am implementing secure boot and flash encryption on esp32
So far.
1. I successfully implemented secure boot with reflashable bootloader
a-> idf.py menuconfig
b-> set secureboot with reflasbale bootloader
c-> genrated secure_boot_key using espsecue.py and given this name to secre boot key in menuconfig
d-> bootloader config->bootloader log verbosity(error)
e-> idf.py build
f-> Burn secure boot key to efuse using: D:\esp\tools.espressif\python_env\idf4.1_py3.9_env\Scripts\python.exe D:/esp/esp-idf/components/esptool_py/esptool/espefuse.py burn_key secure_boot D:/ESP32_Projects/blink/build/bootloader/secure-bootloader-key-256.bin
g-> Burn efuse of secureboot
espefuse -p COM4 burn_efuse ABS_DONE_0
h->First time flash command is:
D:\esp\tools.espressif\python_env\idf4.1_py3.9_env\Scripts\python.exe D:/esp/esp-idf/components/esptool_py/esptool/esptool.py --chip esp32 --port (PORT) --baud (BAUD) --before default_reset --after no_reset write_flash --flash_mode dio --flash_freq 40m --flash_size 2MB
-u 0x1000 D:/ESP32_Projects/blink/build/bootloader/bootloader.bin
i->To reflash the bootloader after initial flash:
D:\esp\tools.espressif\python_env\idf4.1_py3.9_env\Scripts\python.exe D:/esp/esp-idf/components/esptool_py/esptool/esptool.py --chip esp32 --port (PORT) --baud (BAUD) --before default_reset --after no_reset write_flash --flash_mode dio --flash_freq 40m --flash_size 2MB
-u 0x0 D:/ESP32_Projects/blink/build/bootloader/bootloader-reflash-digest.bin
j->idf.py flash monitor
and secureboot is enabled with reflasbable bootloader
2. Now for Flash Encryption -> gone through the flash_encryption example is security esp-idf and it worked.
3. Now for both Secure boot with flash encryption where I am facing problem
What I did
-> Enabled flash encryption first
->then enabled secure boot using same method explained above using (a-i)
->idf.py encrypted-flash monitor
Output is given below kindly have look and kindly tell me what should I do next..Thanks
D:\ESP32_Projects\flash_encryption>idf.py encrypted-flash monitor
Adding "encrypted-flash"'s dependency "all" to list of commands with default set of options.
Executing action: all (aliases: build)
Running ninja in directory d:\esp32_projects\flash_encryption\build
Executing "ninja all"...
[1/4] cmd.exe /C "cd /D D:\ESP32_Projects\flash_encryption\build\esp...*******************************************************************"
Partition table binary generated. Contents:
*******************************************************************************
# Espressif ESP32 Partition Table
# Name, Type, SubType, Offset, Size, Flags
nvs,data,nvs,0x9000,24K,
storage,data,255,0xf000,4K,encrypted
factory,app,factory,0x10000,1M,
*******************************************************************************
[2/4] Performing build step for 'bootloader'
ninja: no work to do.
Executing action: encrypted-flash
Choosing default port b'COM4' (use '-p PORT' option to set a specific serial port)
Running esptool.py in directory d:\esp32_projects\flash_encryption\build
Executing "D:\esp\tools\.espressif\python_env\idf4.1_py3.9_env\Scripts\python.exe D:\esp\esp-idf\components/esptool_py/esptool/esptool.py -p COM4 -b 460800 --before default_reset --after no_reset --chip esp32 write_flash @flash_encrypted_project_args"...
esptool.py -p COM4 -b 460800 --before default_reset --after no_reset --chip esp32 write_flash --encrypt 0x8000 partition_table/partition-table.bin 0x10000 flash_encryption.bin
esptool.py v2.9-dev
Serial port COM4
Connecting........__
Chip is ESP32D0WDQ6 (revision 1)
Features: WiFi, BT, Dual Core, 240MHz, VRef calibration in efuse, Coding Scheme None
Crystal is 40MHz
MAC: 30:ae:a4:fe:62:c8
Uploading stub...
Running stub...
Stub running...
Changing baud rate to 460800
Changed.
Configuring flash size...
Auto-detected Flash size: 4MB
WARNING: - compress and encrypt options are mutually exclusive
Will flash uncompressed
Wrote 16384 bytes at 0x00008000 in 0.4 seconds (349.4 kbit/s)...
Wrote 163840 bytes at 0x00010000 in 3.8 seconds (344.5 kbit/s)...
Leaving...
Staying in bootloader.
Executing action: monitor
Running idf_monitor in directory d:\esp32_projects\flash_encryption
Executing "D:\esp\tools\.espressif\python_env\idf4.1_py3.9_env\Scripts\python.exe D:\esp\esp-idf\tools/idf_monitor.py -p COM4 -b 115200 --toolchain-prefix xtensa-esp32-elf- d:\esp32_projects\flash_encryption\build\flash_encryption.elf --encrypted -m 'D:\esp\tools\.espressif\python_env\idf4.1_py3.9_env\Scripts\python.exe' 'D:\esp\esp-idf\tools\idf.py'"...
--- idf_monitor on COM4 115200 ---
--- Quit: Ctrl+] | Menu: Ctrl+T | Help: Ctrl+T followed by Ctrl+H ---
ets Jun 8 2016 00:22:57
rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
flash read err, 1000
ets_main.c 371
ets Jun 8 2016 00:22:57
rst:0x10 (RTCWDT_RTC_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
flash read err, 1000
ets_main.c 371
ets Jun 8 2016 00:22:57
rst:0x10 (RTCWDT_RTC_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
flash read err, 1000
ets_main.c 371
ets Jun 8 2016 00:22:57
rst:0x10 (RTCWDT_RTC_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
flash read err, 1000
ets_main.c 371
ets Jun 8 2016 00:22:57
rst:0x10 (RTCWDT_RTC_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
flash read err, 1000
ets_main.c 371
ets Jun 8 2016 00:22:57
rst:0x10 (RTCWDT_RTC_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
flash read err, 1000
ets_main.c 371
ets Jun 8 2016 00:22:57
rst:0x10 (RTCWDT_RTC_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
flash read err, 1000
ets_main.c 371
ets Jun 8 2016 00:22:57
rst:0x10 (RTCWDT_RTC_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
flash read err, 1000
ets_main.c 371
Done
D:\ESP32_Projects\flash_encryption>espefuse -p COM4 summary
Connecting........_
Detecting chip type... ESP32
espefuse.py v3.1
EFUSE_NAME (Block) Description = [Meaningful Value] [Readable/Writeable] (Hex Value)
----------------------------------------------------------------------------------------
Calibration fuses:
BLK3_PART_RESERVE (BLOCK0): BLOCK3 partially served for ADC calibration data = False R/W (0b0)
ADC_VREF (BLOCK0): Voltage reference calibration = 1128 R/W (0b00100)
Config fuses:
XPD_SDIO_FORCE (BLOCK0): Ignore MTDI pin (GPIO12) for VDD_SDIO on reset = False R/W (0b0)
XPD_SDIO_REG (BLOCK0): If XPD_SDIO_FORCE, enable VDD_SDIO reg on reset = False R/W (0b0)
XPD_SDIO_TIEH (BLOCK0): If XPD_SDIO_FORCE & XPD_SDIO_REG = 1.8V R/W (0b0)
CLK8M_FREQ (BLOCK0): 8MHz clock freq override = 55 R/W (0x37)
SPI_PAD_CONFIG_CLK (BLOCK0): Override SD_CLK pad (GPIO6/SPICLK) = 0 R/W (0b00000)
SPI_PAD_CONFIG_Q (BLOCK0): Override SD_DATA_0 pad (GPIO7/SPIQ) = 0 R/W (0b00000)
SPI_PAD_CONFIG_D (BLOCK0): Override SD_DATA_1 pad (GPIO8/SPID) = 0 R/W (0b00000)
SPI_PAD_CONFIG_HD (BLOCK0): Override SD_DATA_2 pad (GPIO9/SPIHD) = 0 R/W (0b00000)
SPI_PAD_CONFIG_CS0 (BLOCK0): Override SD_CMD pad (GPIO11/SPICS0) = 0 R/W (0b00000)
DISABLE_SDIO_HOST (BLOCK0): Disable SDIO host = False R/W (0b0)
Efuse fuses:
WR_DIS (BLOCK0): Efuse write disable mask = 384 R/W (0x0180)
RD_DIS (BLOCK0): Efuse read disable mask = 3 R/W (0x3)
CODING_SCHEME (BLOCK0): Efuse variable block length scheme
= NONE (BLK1-3 len=256 bits) R/W (0b00)
KEY_STATUS (BLOCK0): Usage of efuse block 3 (reserved) = False R/W (0b0)
Identity fuses:
MAC (BLOCK0): Factory MAC Address
= 30:ae:a4:fe:62:c8 (CRC 0x61 OK) R/W
MAC_CRC (BLOCK0): CRC8 for factory MAC address = 97 R/W (0x61)
CHIP_VER_REV1 (BLOCK0): Silicon Revision 1 = True R/W (0b1)
CHIP_VER_REV2 (BLOCK0): Silicon Revision 2 = False R/W (0b0)
CHIP_VERSION (BLOCK0): Reserved for future chip versions = 2 R/W (0b10)
CHIP_PACKAGE (BLOCK0): Chip package identifier = 0 R/W (0b000)
MAC_VERSION (BLOCK3): Version of the MAC field = 0 R/W (0x00)
Security fuses:
FLASH_CRYPT_CNT (BLOCK0): Flash encryption mode counter = 1 R/W (0b0000001)
UART_DOWNLOAD_DIS (BLOCK0): Disable UART download mode (ESP32 rev3 only) = False R/W (0b0)
FLASH_CRYPT_CONFIG (BLOCK0): Flash encryption config (key tweak bits) = 15 R/W (0xf)
CONSOLE_DEBUG_DISABLE (BLOCK0): Disable ROM BASIC interpreter fallback = True R/W (0b1)
ABS_DONE_0 (BLOCK0): Secure boot V1 is enabled for bootloader image = True R/W (0b1)
ABS_DONE_1 (BLOCK0): Secure boot V2 is enabled for bootloader image = False R/W (0b0)
JTAG_DISABLE (BLOCK0): Disable JTAG = True R/W (0b1)
DISABLE_DL_ENCRYPT (BLOCK0): Disable flash encryption in UART bootloader = False R/W (0b0)
DISABLE_DL_DECRYPT (BLOCK0): Disable flash decryption in UART bootloader = True R/W (0b1)
DISABLE_DL_CACHE (BLOCK0): Disable flash cache in UART bootloader = True R/W (0b1)
BLOCK1 (BLOCK1): Flash encryption key
= ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? -/-
BLOCK2 (BLOCK2): Secure boot key
= ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? ?? -/-
BLOCK3 (BLOCK3): Variable Block 3
= 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 R/W
Flash voltage (VDD_SDIO) determined by GPIO12 on reset (High for 1.8V, Low/NC for 3.3V).