How to select only the constant values in a timeseries

• This is a completely vectorized solution, so it will be fast compared to solutions with loops or apply.
• The datetime column should be converted to a datetime dtype, and then sorted on that column, but that column isn't used to determine the consecutive occurrences.
• This solution uses parts of two other Stack Overflow answers:
  1. GroupBy Pandas Count Consecutive Zero's
  2. Pandas groupby take counts greater than 1
• The issue is, the data can't be grouped by val because, as in the example, the groups of consecutive numbers are not unique (e.g. both groups are 0.0)
  • .ne, .shift, and .cumsum are used to create a Series, where each sequence of consecutive values, is a unique value.
  • With a sequence of unique consecutive values, groupby can be used to create a Boolean mask to select the rows, where the count of consecutive values is greater than 4, in this case.
    • df['val'].groupby(g).transform('count') > 4 creates a Boolean mask, which is use to select rows from df[['datetime', 'val']]
    • Since the request is for no movement in a 2 minute period, the count should be >=4 because the time steps are 30 seconds, and 5 consecutive occurrences is 2 minutes

import pandas as pd

# sample dataframe is the same as the data in the op
data = {'datetime': ['2020-02-27 15:43:00', '2020-02-27 15:43:30', '2020-02-27 15:44:00', '2020-02-27 15:44:30', '2020-02-27 15:45:00', '2020-02-27 15:45:30', '2020-02-27 15:46:00', '2020-02-27 15:46:30', '2020-02-27 15:47:00', '2020-02-27 15:47:30', '2020-02-27 15:48:00', '2020-02-27 15:48:30', '2020-02-27 15:49:00', '2020-02-27 15:49:30', '2020-02-27 15:50:00', '2020-02-27 15:50:30', '2020-02-27 15:51:00', '2020-02-27 15:51:30', '2020-02-27 15:52:00', '2020-02-27 15:52:30', '2020-02-27 15:53:00', '2020-02-27 15:53:30', '2020-02-27 15:54:00', '2020-02-27 15:54:30', '2020-02-27 15:55:00', '2020-02-27 15:55:30', '2020-02-27 15:56:00', '2020-02-27 15:56:30', '2020-02-27 15:57:00', '2020-02-27 15:57:30', '2020-02-27 15:58:00'], 'val': [0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 1.004333, 2.002667, 5.001, 6.002667, 8.001, 4.000667, 3.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0]}
df = pd.DataFrame(data)

# display(df.head())
              datetime  val
0  2020-02-27 15:43:00  0.0
1  2020-02-27 15:43:30  0.0
2  2020-02-27 15:44:00  0.0
3  2020-02-27 15:44:30  0.0
4  2020-02-27 15:45:00  0.0

# create a Series with the same index as df, where the consecutive values are unique
g = df.val.ne(df.val.shift()).cumsum()

# use g with groupby to count the consecutive values and then create a Boolean using > 4 (will represent 2 minutes, when the time interval is 30 seconds).
consecutive_data = df[['datetime', 'val']][df['val'].groupby(g).transform('count') > 4]

display(consecutive_data)

               datetime  val
0   2020-02-27 15:43:00  0.0
1   2020-02-27 15:43:30  0.0
2   2020-02-27 15:44:00  0.0
3   2020-02-27 15:44:30  0.0
4   2020-02-27 15:45:00  0.0
5   2020-02-27 15:45:30  0.0
6   2020-02-27 15:46:00  0.0
7   2020-02-27 15:46:30  0.0
8   2020-02-27 15:47:00  0.0
9   2020-02-27 15:47:30  0.0
10  2020-02-27 15:48:00  0.0
11  2020-02-27 15:48:30  0.0
12  2020-02-27 15:49:00  0.0
13  2020-02-27 15:49:30  0.0
14  2020-02-27 15:50:00  0.0
15  2020-02-27 15:50:30  0.0
16  2020-02-27 15:51:00  0.0
17  2020-02-27 15:51:30  0.0
25  2020-02-27 15:55:30  0.0
26  2020-02-27 15:56:00  0.0
27  2020-02-27 15:56:30  0.0
28  2020-02-27 15:57:00  0.0
29  2020-02-27 15:57:30  0.0
30  2020-02-27 15:58:00  0.0

import pandas as pd
from datetime import datetime


d1 = datetime.strptime("2020-02-27 15:43:00","%Y-%m-%d %H:%M:%S")
d2 = datetime.strptime('2020-02-27 15:58:00', "%Y-%m-%d %H:%M:%S")

df = pd.date_range(d1,d2, periods=30)
df = pd.DataFrame(df)
df['val'] = [0]*10 + list(range(10)) + [10]*10
df.columns = ['date','val']


def get_cont_lists(series, n):
    '''
    
    Given a list returns list of lists of indices where the values are constant
    for >= n consecutive values
    
    
    '''
    
    
    lol = []
    
    current_list = []
    prev_value = None
    
    
    for idx,elem in enumerate(series):

        if elem == prev_value:
            current_list.append(idx)        
        
        if elem != prev_value:
            lol.append(current_list)
            current_list = [idx]
            prev_value = elem
        

    
    lol.append(current_list)
    
    lol = [lst for lst in lol if len(lst)>=n]
    
    return lol


cont_lst = get_cont_lists(lst,4)
cont_lst = [i for j in cont_lst for i in j]

required_df = df.iloc[cont_lst]

print(required_df)