How to restore web-cam to default settings after ruining them with OpenCV settings?

I need video from web-cam. On Anaconda with python-3.6 and OpenCV-3 it worked fine. I tried then the same code in Idle with python-3.6 and OpenCV-4.1.0 and it did not worked in anaconda. I had two black upper and lower edges, and I could only see the middle of the image. I tried to modify some OpenCV settings and it only got worse, now I barely see anything on the image, only if I put strong light. The two edges did not disappeared.

import cv2

capture = cv2.VideoCapture(0)
capture.set(cv2.CAP_PROP_SETTINGS, 0)

while(True):

    ret, frame = capture.read()
    cv2.imshow('video', frame)
    if cv2.waitKey(1) == 27:
        break

capture.release()
cv2.destroyAllWindows()

The line capture.set(cv2.CAP_PROP_SETTINGS, 0) opens a small settings dialog, but there are many other, like this:

1. CV_CAP_PROP_POS_MSEC Current position of the video file in milliseconds.
2. CV_CAP_PROP_POS_FRAMES 0-based index of the frame to be decoded/captured next.
3. CV_CAP_PROP_POS_AVI_RATIO Relative position of the video file
4. CV_CAP_PROP_FRAME_WIDTH Width of the frames in the video stream.
5. CV_CAP_PROP_FRAME_HEIGHT Height of the frames in the video stream.
6. CV_CAP_PROP_FPS Frame rate.
7. CV_CAP_PROP_FOURCC 4-character code of codec.
8. CV_CAP_PROP_FRAME_COUNT Number of frames in the video file.
9. CV_CAP_PROP_FORMAT Format of the Mat objects returned by retrieve() .
10. CV_CAP_PROP_MODE Backend-specific value indicating the current capture mode.
11. CV_CAP_PROP_BRIGHTNESS Brightness of the image (only for cameras).
12. CV_CAP_PROP_CONTRAST Contrast of the image (only for cameras).
13. CV_CAP_PROP_SATURATION Saturation of the image (only for cameras).
14. CV_CAP_PROP_HUE Hue of the image (only for cameras).
15. CV_CAP_PROP_GAIN Gain of the image (only for cameras).
16. CV_CAP_PROP_EXPOSURE Exposure (only for cameras).
17. CV_CAP_PROP_CONVERT_RGB Boolean flags indicating whether images should be converted to RGB.
18. CV_CAP_PROP_WHITE_BALANCE Currently unsupported
19. CV_CAP_PROP_RECTIFICATION Rectification flag for stereo cameras (note: only supported by DC1394 v 2.x backend currently)

I tried to install some camera drivers from asus, but couldn't find any for my model: FX504GE . Is there any combination of this settings or smth to restore my web-cam? I really need it rn...