I'm following the instructions from this answer to generate the follow S3 bucket policy:
{
"Id": "Policy1495981680273",
"Version": "2012-10-17",
"Statement": [
{
"Sid": "Stmt1495981517155",
"Action": [
"s3:GetObject"
],
"Effect": "Allow",
"Resource": "arn:aws:s3:::surplace-audio",
"Principal": "*"
}
]
}
I get back the following error:
Action does not apply to any resource(s) in statement
What am I missing from my policy?
Just removing the s3:ListBucket permission wasn't really a good enough solution for me, and probably isn't for many others.
If you want the s3:ListBucket permission, you need to just have the plain arn of the bucket (without the /* at the end) as this permission applies to the bucket itself and not items within the bucket.
As shown below, you have to have the s3:ListBucket permission as a separate statement from the permissions pertaining to items within the bucket like s3:GetObject and s3:PutObject:
{
"Version": "2012-10-17",
"Statement": [
{
"Effect": "Allow",
"Action": [
"s3:ListBucket"
],
"Principal": {
"AWS": "[IAM ARN HERE]"
},
"Resource": "arn:aws:s3:::my-bucket-name"
},
{
"Effect": "Allow",
"Action": [
"s3:GetObject",
"s3:PutObject"
],
"Principal": {
"AWS": "[IAM ARN HERE]"
},
"Resource": "arn:aws:s3:::my-bucket-name/*"
}
]
}
Just ran into this issue and found a shorter solution for those that want to have ListBucket and GetObject in the same policy. The important thing is to list both the bucket-name and bucket-name/* under Resource.
{
"Id": "Policyxxxx961",
"Version": "2012-10-17",
"Statement": [
{
"Sid": "Stmtxxxxx4365",
"Action": [
"s3:GetObject",
"s3:ListBucket",
"s3:PutObject"
],
"Effect": "Allow",
"Resource": [
"arn:aws:s3:::bucket-name",
"arn:aws:s3:::bucket-name/*"
],
"Principal": "*"
}
]
}
To fix this issue, what you need to do in policy rule, locate the Resource, and add your arn bucket in array, one with * and the second on without * at the end. This will fix the error.
{
"Version": "2012-10-17",
"Id": "Policy3783783783738",
"Statement": [
{
"Sid": "Stmt1615891730703",
"Effect": "Allow",
"Principal": {
"AWS": "arn:aws:iam::76367367633:user/magazine-demo-root-user"
},
"Action": [
"s3:ListBucket",
"s3:ListBucketVersions",
"s3:GetBucketLocation",
"s3:DeleteObject",
"s3:AbortMultipartUpload",
"s3:Get*",
"s3:Put*"
],
"Resource": [
"arn:aws:s3:::magazine-demo",
"arn:aws:s3:::magazine-demo/*"
]
}
]
}
I have also faced the similar issue while creating the bucket
{
"Version": "2012-10-17",
"Statement": [
{
"Sid": "AddPerm",
"Effect": "Allow",
"Principal": "*",
"Action": [
"s3:GetObject"
],
"Resource": [
"arn:aws:s3:::mrt9949"
]
}
]
}
I have changed the above code to
{
"Version": "2012-10-17",
"Statement": [
{
"Sid": "AddPerm",
"Effect": "Allow",
"Principal": "*",
"Action": [
"s3:GetObject"
],
"Resource": [
"arn:aws:s3:::mrt9949/*"
]
}
]
}
add /* to your bucket name it will solve the issue
Here my bucket name is mrt9949
In my case the solution to this error was trying to remove some of Actions that I was applying. Some of them are not relevant to, or cannot work with this resource. In this case it wouldn't let me include these:
GetBucketAcl ListBucket ListBucketMultipartUploads
Just do one change in json policy resource.
"Resource": ["arn:aws:s3:::bucket-name/*"]
Note : Add /* after bucket-name
Ref Docs : https://docs.aws.amazon.com/IAM/latest/UserGuide/reference_policies_elements.html
Whenever you are trying to apply use bucket policies. Remember this thing, If you are using actions like "s3:ListBucket", "s3:GetBucketPolicy", "s3:GetBucketAcl" etc. which are related to bucket, the resource attribute in policy should be mentioned as <"Resource": "arn:aws:s3:::bucket_name">.
Ex.
{
"Version": "2012-10-17",
"Id": "Policy1608224885249",
"Statement": [
{
"Sid": "Stmt1608226298927",
"Effect": "Allow",
"Principal": "*",
"Action": [
"s3:GetBucketPolicy",
"s3:GetBucketAcl",
"s3:ListBucket"
],
"Resource": "arn:aws:s3:::bucket_name"
}
]
}
If you are using actions like "s3:GetObject", "s3:DeleteObject", "s3:GetObject" etc. which are related to object, the resource attribute in policy should be mentioned as <"Resource": "arn:aws:s3:::bucket_name/*">.
ex.
{
"Id": "Policy1608228066771",
"Version": "2012-10-17",
"Statement": [
{
"Sid": "Stmt1608228057071",
"Action": [
"s3:DeleteObject",
"s3:GetObject"
],
"Effect": "Allow",
"Resource": "arn:aws:s3:::bucket_name/*",
"Principal": "*"
}
]
}
Finally if you are using actions like "s3:ListBucket", "s3:GetObject" etc. these actions are related to both bucket and object then the resource attribute in policy should be mentioned as <"Resource": ["arn:aws:s3:::bucket_name/*", "Resource": "arn:aws:s3:::bucket_name">.
ex.
{
"Version": "2012-10-17",
"Id": "Policy1608224885249",
"Statement": [
{
"Sid": "Stmt1608226298927",
"Effect": "Allow",
"Principal": "*",
"Action": [
"s3:ListBucket",
"s3:GetObject"
],
"Resource": [
"arn:aws:s3:::bucket_name",
"arn:aws:s3:::bucket_name/*"
]
}
] }
You might have several policy statements and this error is a very generic one. Best is to comment all other statements except any one (like just GetObject, or ListBuckets, Or PutObject) and execute the code and see. If it works fine, it means the ARN path is right. Else, the ARN should include the bucket name alone or a bucketname with /*.
Some resources like ListBucket accept ARN with the full name like "arn:aws:s3:::bucket_name", while GetObject or PutObject expects a /* after the bucket_name. Change the ARNs according to the service and it should work now!
You have to check the pattern of the arn defined under the Resource tag for the Policy-
"Resource": "arn:aws:s3:::s3mybucketname/*"
With the addition of "/*" at the end would help to resolve the issue if you face it even after having your Public Access Policy Unblocked for your Bucket.
From AWS > Documentation > AWS Identity and Access Management > User Guide https://docs.aws.amazon.com/IAM/latest/UserGuide/reference_policies_elements_resource.html
It is clearly defined in a note, Some services do not let you specify actions for individual resources.
you use the wildcard * in the Resource element
"Resource": "arn:aws:s3:::surplace-audio/*"
You can also configure ListBuckets for each folder, like so
{
"Version": "2012-10-17",
"Statement": [
{
"Sid": "AllowSESPuts-1521238702575",
"Effect": "Allow",
"Principal": {
"Service": "ses.amazonaws.com"
},
"Action": "s3:PutObject",
"Resource": "arn:aws:s3:::buckets.email/*",
"Condition": {
"StringEquals": {
"aws:Referer": "[red]"
}
}
},
{
"Sid": "Stmt1586754972129",
"Effect": "Allow",
"Principal": {
"AWS": "arn:aws:iam::596322993031:user/[red]"
},
"Action": "s3:ListBucket",
"Resource": "arn:aws:s3:::buckets.email",
"Condition": {
"StringEquals": {
"s3:delimiter": "/",
"s3:prefix": [
"",
"domain.co",
"domain.co/user"
]
}
}
},
{
"Sid": "Stmt1586754972129",
"Effect": "Allow",
"Principal": {
"AWS": "arn:aws:iam::596322993031:user/[red]"
},
"Action": "s3:ListBucket",
"Resource": "arn:aws:s3:::buckets.email",
"Condition": {
"StringLike": {
"s3:prefix": "domain.co/user/*"
}
}
},
{
"Effect": "Allow",
"Principal": {
"AWS": "arn:aws:iam::596322993031:user/[red]"
},
"Action": [
"s3:GetObject",
"s3:PutObject",
"s3:DeleteObject"
],
"Resource": "arn:aws:s3:::buckets.email/domain.co/user/*"
}
]
}
These rules are used together with SES to receive an email, but allows an external user to view the files that were put in the bucket by SES. I followed the instructions from here: https://aws.amazon.com/blogs/security/writing-iam-policies-grant-access-to-user-specific-folders-in-an-amazon-s3-bucket/
Also, you must specify prefix as domain.co/user/ WITH slash at the end when using the SDK, otherwise you'll get access denied. hope it helps anyone
This is so simple just add "/*" at the end. You have given only the root directory link, but the action needs to be applied to the object.
Type, "Resource": "arn:aws:s3:::surplace-audio/*"