Custom linux pcie driver MSI interrupts

Question

I am writing a custom linux PCIe driver for an embedded device. For this purpose I need to enable multiple MSI vectors. When I use the function pci_enable_msi(pdev) the code works properly. However when I use pci_enable_msi_block(pdev,4); the function returns 1 meaning it can only allocate 1 interrupt. If I use pci_enable_msi_block(pdev,32); the function returns 16 upon which I use pci_enable_msi_block(pdev,16); but the return value is again 1.

I tried to check the return value for all possible arguments and the result was as below:

for(i=2;i<33;i++)
    {
       ret = pci_enable_msi_block(pdev,i);
       printk(KERN_DEBUG "For request i=%d the return value is=%d
",i, ret);
    }

[   89.421184] For request i=2 the return value is=1
[   89.421196] For request i=3 the return value is=1
[   89.421208] For request i=4 the return value is=1
[   89.421220] For request i=5 the return value is=1
[   89.421232] For request i=6 the return value is=1
[   89.421243] For request i=7 the return value is=1
[   89.421255] For request i=8 the return value is=1
[   89.421266] For request i=9 the return value is=1
[   89.421278] For request i=10 the return value is=1
[   89.421290] For request i=11 the return value is=1
[   89.421301] For request i=12 the return value is=1
[   89.421313] For request i=13 the return value is=1
[   89.421325] For request i=14 the return value is=1
[   89.421336] For request i=15 the return value is=1
[   89.421348] For request i=16 the return value is=1
[   89.421353] For request i=17 the return value is=16
[   89.421359] For request i=18 the return value is=16
[   89.421364] For request i=19 the return value is=16
[   89.421369] For request i=20 the return value is=16
[   89.421374] For request i=21 the return value is=16
[   89.421380] For request i=22 the return value is=16
[   89.421385] For request i=23 the return value is=16
[   89.421390] For request i=24 the return value is=16
[   89.421395] For request i=25 the return value is=16
[   89.421401] For request i=26 the return value is=16
[   89.421406] For request i=27 the return value is=16
[   89.421411] For request i=28 the return value is=16
[   89.421416] For request i=29 the return value is=16
[   89.421422] For request i=30 the return value is=16
[   89.421427] For request i=31 the return value is=16
[   89.421432] For request i=32 the return value is=16

the function call is successful (returns 0) only when pci_enable_msi_block(pdev,1) is used.

I have also tried to use the pci_enable_msi_exact and pci_enable_msi_range functions but then the code does not compile and gives an implicit function declaration error.

Kindly provide suggestions on how to resolve this issue so that I can use four MSI vectors.

Custom linux pcie driver MSI interrupts

1 Answers