I have noticed that our VMWare VMs often have the incorrect time on them. No matter how many times I reset the time they keep on desyncing.
Has anyone else noticed this? What do other people do to keep their VM time in sync?
Edit: These are CLI linux VMs btw..
If your host time is correct, you can set the following .vmx configuration file option to enable periodic synchronization:
tools.syncTime = true
By default, this synchronizes the time every minute. To change the periodic rate, set the following option to the desired synch time in seconds:
tools.syncTime.period = 60
For this to work you need to have VMWare tools installed in your guest OS.
See http://www.vmware.com/pdf/vmware_timekeeping.pdf for more information
I'll answer for Windows guests. If you have VMware Tools installed, then the taskbar's notification area (near the clock) has an icon for VMware Tools. Double-click that and set your options.
If you don't have VMware Tools installed, you can still set the clock's option for internet time to sync with some NTP server. If your physical machine serves the NTP protocol to your guest machines then you can get that done with host-only networking. Otherwise you'll have to let your guests sync with a genuine NTP server out on the internet, for example time.windows.com.
Something to note here. We had the same issue with Windows VM's running on an ESXi host. The time sync was turned on in VMWare Tools on the guest, but the guest clocks were consistently off (by about 30 seconds) from the host clock. The ESXi host was configured to get time updates from an internal time server.
It turns out we had the Internet Time setting turned on in the Windows VM's (Control Panel > Date and Time > Internet Time tab) so the guest was getting time updates from two places and the internet time was winning. We turned that off and now the guest clocks are good, getting their time exclusively from the ESXi host.
The CPU speed varies due to power saving. I originally noticed this because VMware gave me a helpful tip on my laptop, but this page mentions the same thing:
Quote from : VMWare tips and tricks Power saving (SpeedStep, C-states, P-States,...)
Your power saving settings may interfere significantly with vmware's performance. There are several levels of power saving.
CPU frequency
This should not lead to performance degradation, outside of having the obvious lower performance when running the CPU at a lower frequency (either manually of via governors like "ondemand" or "conservative"). The only problem with varying the CPU speed while vmware is running is that the Windows clock will gain of lose time. To prevent this, specify your full CPU speed in kHz in /etc/vmware/config
host.cpukHz = 2167000
VMware experiences a lot of clock drift. This Google search for 'vmware clock drift' links to several articles.
The first hit may be the most useful for you: http://www.fjc.net/linux/linux-and-vmware-related-issues/linux-2-6-kernels-and-vmware-clock-drift-issues