fatal: unable to access : Failed to connect to bitbucket.org port 443: Connection timed out

UPDATE: 28-08-2020

This is Temp fix but at least working for me after bitbucket new IP changed

Note:- hosts file can be found in windows at C:\Windows\System32\drivers\etc and in Linux it exists at /etc/hosts. make sure you edit with admin rights i.e in windows open notepad as administrator and then open host file. In Linux sudo gedit /etc/hosts from the terminal from any location :)

just add the below line in hosts file

18.205.93.0 bitbucket.org

For all existing users who previously edited etc/hosts file and now stopped working just replace the old IP address of bitbucket with new one i.e in etc/hosts

REPLACE 104.192.143.3(old IP whatever) bitbucket.org

with

18.205.93.0 bitbucket.org

Happy Coding!

Recommendation 1: Just you need to remove your origin and set the origin again, then try to pull/push. Hopefully, it will work for you.

 git remote -v
 git remote remove origin    
 git remote add origin https://habibbd@bitbucket.org/softwarebd/mida-oss.git 

Recommendation 2: Remove those of lines from Windows/System32/drivers/etc/hosts file if anyone of these lines is available.

 104.192.143.1 bitbucket.org
 104.192.143.2 bitbucket.org
 18.205.93.0 bitbucket.org

Recommendation 3: Change your network connection/provider. Sometimes your network provider causes this kind of issue.

Recommendation 4: Check firewall settings. Sometimes it was the issue for showing this kind of message.

Try upgrading git if you have the old version.

Check your git version:

$ git --version

Run the following to upgrade:

sudo add-apt-repository ppa:git-core/ppa
sudo apt-get update
sudo apt-get install git

Check if you require VPN and reconnect. That was the reason for me. After I reconnected to the VPN everything worked as normal.

First, you are not pushing to GitHub, but BitBucket.

Second, since BitBucket status seems OK, there must be a network or proxy or firewall issue on your side.

Regarding the proxy specifically:

• check your ~/gitconfig file content
• remove any proxy line

• set a proxy in your environment variables:

  export http_proxy=http://someuser:somepassword@192.168.1.1:80