Someone told me that he has seen software systems that:
Is that possible? I thought that it wasn't possible / feasible to decrypt MD5 hashes.
I know there are MD5 dictionaries, but is there an actual decryption algorithm?
No. MD5 is not encryption (though it may be used as part of some encryption algorithms), it is a one way hash function. Much of the original data is actually "lost" as part of the transformation.
Think about this: An MD5 is always 128 bits long. That means that there are 2128 possible MD5 hashes. That is a reasonably large number, and yet it is most definitely finite. And yet, there are an infinite number of possible inputs to a given hash function (and most of them contain more than 128 bits, or a measly 16 bytes). So there are actually an infinite number of possibilities for data that would hash to the same value. The thing that makes hashes interesting is that it is incredibly difficult to find two pieces of data that hash to the same value, and the chances of it happening by accident are almost 0.
A simple example for a (very insecure) hash function (and this illustrates the general idea of it being one-way) would be to take all of the bits of a piece of data, and treat it as a large number. Next, perform integer division using some large (probably prime) number n and take the remainder (see: Modulus). You will be left with some number between 0 and n. If you were to perform the same calculation again (any time, on any computer, anywhere), using the exact same string, it will come up with the same value. And yet, there is no way to find out what the original value was, since there are an infinite number of numbers that have that exact remainder, when divided by n.
That said, MD5 has been found to have some weaknesses, such that with some complex mathematics, it may be possible to find a collision without trying out 2128 possible input strings. And the fact that most passwords are short, and people often use common values (like "password" or "secret") means that in some cases, you can make a reasonably good guess at someone's password by Googling for the hash or using a Rainbow table. That is one reason why you should always "salt" hashed passwords, so that two identical values, when hashed, will not hash to the same value.
Once a piece of data has been run through a hash function, there is no going back.
Not directly. Because of the pigeonhole principle, there is (likely) more than one value that hashes to any given MD5 output. As such, you can't reverse it with certainty. Moreover, MD5 is made to make it difficult to find any such reversed hash (however there have been attacks that produce collisions - that is, produce two values that hash to the same result, but you can't control what the resulting MD5 value will be).
However, if you restrict the search space to, for example, common passwords with length under N, you might no longer have the irreversibility property (because the number of MD5 outputs is much greater than the number of strings in the domain of interest). Then you can use a rainbow table or similar to reverse hashes.
No, he must have been confused about the MD5 dictionaries.
Cryptographic hashes (MD5, etc...) are one way and you can't get back to the original message with only the digest unless you have some other information about the original message, etc. that you shouldn't.
Decryption (directly getting the the plain text from the hashed value, in an algorithmic way), no.
There are, however, methods that use what is known as a rainbow table. It is pretty feasible if your passwords are hashed without a salt.
MD5 is considered broken, not because you can get back the original content from the hash, but because with work, you can craft two messages that hash to the same hash.
You cannot un-hash an MD5 hash.
No, it is not possible to reverse a hash function such as MD5: given the output hash value it is impossible to find the input message unless enough information about the input message is known.
Decryption is not a function that is defined for a hash function; encryption and decryption are functions of a cipher such as AES in CBC mode; hash functions do not encrypt nor decrypt. Hash functions are used to digest an input message. As the name implies there is no reverse algorithm possible by design.
MD5 has been designed as a cryptographically secure, one-way hash function. It is now easy to generate collisions for MD5 - even if a large part of the input message is pre-determined. So MD5 is officially broken and MD5 should not be considered a cryptographically secure hash anymore. It is however still impossible to find an input message that leads to a hash value: find X when only H(X) is known (and X doesn't have a pre-computed structure with at least one 128 byte block of precomputed data). There are no known pre-image attacks against MD5.
It is generally also possible to guess passwords using brute force or (augmented) dictionary attacks, to compare databases or to try and find password hashes in so called rainbow tables. If a match is found then it is computationally certain that the input has been found. Hash functions are also secure against collision attacks: finding X' so that H(X') = H(X) given H(X). So if an X is found it is computationally certain that it was indeed the input message. Otherwise you would have performed a collision attack after all. Rainbow tables can be used to speed up the attacks and there are specialized internet resources out there that will help you find a password given a specific hash.
It is of course possible to re-use the hash value H(X) to verify passwords that were generated on other systems. The only thing that the receiving system has to do is to store the result of a deterministic function F that takes H(X) as input. When X is given to the system then H(X) and therefore F can be recalculated and the results can be compared. In other words, it is not required to decrypt the hash value to just verify that a password is correct, and you can still store the hash as a different value.
Instead of MD5 it is important to use a password hash or PBKDF (password based key derivation function) instead. Such a function specifies how to use a salt together with a hash. That way identical hashes won't be generated for identical passwords (from other users or within other databases). Password hashes for that reason also do not allow rainbow tables to be used as long as the salt is large enough and properly randomized.
Password hashes also contain a work factor (sometimes configured using an iteration count) that can significantly slow down attacks that try to find the password given the salt and hash value. This is important as the database with salts and hash values could be stolen. Finally, the password hash may also be memory-hard so that a significant amount of memory is required to calculate the hash. This makes it impossible to use special hardware (GPU's, ASIC's, FPGA's etc.) to allow an attacker to speed up the search. Other inputs or configuration options such as a pepper or the amount of parallelization may also be available to a password hash.
It will however still allow anybody to verify a password given H(X) even if H(X) is a password hash. Password hashes are still deterministic, so if anybody has knows all the input and the hash algorithm itself then X can be used to calculate H(X) and - again - the results can be compared.
Commonly used password hashes are bcrypt, scrypt and PBKDF2. There is also Argon2 in various forms which is the winner of the reasonably recent password hashing competition. Here on CrackStation is a good blog post on doing password security right.
It is possible to make it impossible for adversaries to perform the hash calculation verify that a password is correct. For this a pepper can be used as input to the password hash. Alternatively, the hash value can of course be encrypted using a cipher such as AES and a mode of operation such as CBC or GCM. This however requires the storage of a secret / key independently and with higher access requirements than the password hash.
You can find online tools that use a dictionary to retrieve the original message.
In some cases, the dictionary method might just be useless:
For example, here is one MD5 decrypter online tool.
The only thing that can be work is (if we mention that the passwords are just hashed, without adding any kind of salt to prevent the replay attacks, if it is so you must know the salt)by the way, get an dictionary attack tool, the files of many words, numbers etc. then create two rows, one row is word,number (in dictionary) the other one is hash of the word, and compare the hashes if matches you get it...
that's the only way, without going into cryptanalysis.
No, it cannot be done. Either you can use a dictionary, or you can try hashing different values until you get the hash that you are seeking. But it cannot be "decrypted".
In theory it is not possible to decrypt a hash value but you have some dirty techniques for getting the original plain text back.
MD5 is a cryptographic (one-way) hash function, so there is no direct way to decode it. The entire purpose of a cryptographic hash function is that you can't undo it.
One thing you can do is a brute-force strategy, where you guess what was hashed, then hash it with the same function and see if it matches. Unless the hashed data is very easy to guess, it could take a long time though.
No, you can not decrypt/reverse the md5 as it is a one-way hash function till you can not found a extensive vulnerabilities in the MD5. Another way is there are some website has a large amount of set of password database, so you can try online to decode your MD5 or SHA1 hash string. I tried a website like http://www.mycodemyway.com/encrypt-and-decrypt/md5 and its working fine for me but this totally depends on your hash if that hash is stored in that database then you can get the actual string.
