Unicode (UTF-8) reading and writing to files in Python

Rather than mess with .encode and .decode, specify the encoding when opening the file. The io module, added in Python 2.6, provides an io.open function, which allows specifying the file's encoding.

Supposing the file is encoded in UTF-8, we can use:

>>> import io
>>> f = io.open("test", mode="r", encoding="utf-8")

Then f.read returns a decoded Unicode object:

>>> f.read()
u'Capit\xe1l\n\n'

In 3.x, the io.open function is an alias for the built-in open function, which supports the encoding argument (it does not in 2.x).

We can also use open from the codecs standard library module:

>>> import codecs
>>> f = codecs.open("test", "r", "utf-8")
>>> f.read()
u'Capit\xe1l\n\n'

Note, however, that this can cause problems when mixing read() and readline().

In the notation u'Capit\xe1n\n' (should be just 'Capit\xe1n\n' in 3.x, and must be in 3.0 and 3.1), the \xe1 represents just one character. \x is an escape sequence, indicating that e1 is in hexadecimal.

Writing Capit\xc3\xa1n into the file in a text editor means that it actually contains \xc3\xa1. Those are 8 bytes and the code reads them all. We can see this by displaying the result:

# Python 3.x - reading the file as bytes rather than text,
# to ensure we see the raw data
>>> open('f2', 'rb').read()
b'Capit\\xc3\\xa1n\n'

# Python 2.x
>>> open('f2').read()
'Capit\\xc3\\xa1n\n'

Instead, just input characters like á in the editor, which should then handle the conversion to UTF-8 and save it.

In 2.x, a string that actually contains these backslash-escape sequences can be decoded using the string_escape codec:

# Python 2.x
>>> print 'Capit\\xc3\\xa1n\n'.decode('string_escape')
Capitán

The result is a str that is encoded in UTF-8 where the accented character is represented by the two bytes that were written \\xc3\\xa1 in the original string. To get a unicode result, decode again with UTF-8.

In 3.x, the string_escape codec is replaced with unicode_escape, and it is strictly enforced that we can only encode from a str to bytes, and decode from bytes to str. unicode_escape needs to start with a bytes in order to process the escape sequences (the other way around, it adds them); and then it will treat the resulting \xc3 and \xa1 as character escapes rather than byte escapes. As a result, we have to do a bit more work:

# Python 3.x
>>> 'Capit\\xc3\\xa1n\n'.encode('ascii').decode('unicode_escape').encode('latin-1').decode('utf-8')
'Capitán\n'

So, I've found a solution for what I'm looking for, which is:

print open('f2').read().decode('string-escape').decode("utf-8")

There are some unusual codecs that are useful here. This particular reading allows one to take UTF-8 representations from within Python, copy them into an ASCII file, and have them be read in to Unicode. Under the "string-escape" decode, the slashes won't be doubled.

This allows for the sort of round trip that I was imagining.

Well, your favorite text editor does not realize that \xc3\xa1 are supposed to be character literals, but it interprets them as text. That's why you get the double backslashes in the last line -- it's now a real backslash + xc3, etc. in your file.

If you want to read and write encoded files in Python, best use the codecs module.

Pasting text between the terminal and applications is difficult, because you don't know which program will interpret your text using which encoding. You could try the following:

>>> s = file("f1").read()
>>> print unicode(s, "Latin-1")
Capitán

Then paste this string into your editor and make sure that it stores it using Latin-1. Under the assumption that the clipboard does not garble the string, the round trip should work.

You have stumbled over the general problem with encodings: How can I tell in which encoding a file is?

Answer: You can't unless the file format provides for this. XML, for example, begins with:

<?xml encoding="utf-8"?>

This header was carefully chosen so that it can be read no matter the encoding. In your case, there is no such hint, hence neither your editor nor Python has any idea what is going on. Therefore, you must use the codecs module and use codecs.open(path,mode,encoding) which provides the missing bit in Python.

As for your editor, you must check if it offers some way to set the encoding of a file.

The point of UTF-8 is to be able to encode 21-bit characters (Unicode) as an 8-bit data stream (because that's the only thing all computers in the world can handle). But since most OSs predate the Unicode era, they don't have suitable tools to attach the encoding information to files on the hard disk.

The next issue is the representation in Python. This is explained perfectly in the comment by heikogerlach. You must understand that your console can only display ASCII. In order to display Unicode or anything >= charcode 128, it must use some means of escaping. In your editor, you must not type the escaped display string but what the string means (in this case, you must enter the umlaut and save the file).

That said, you can use the Python function eval() to turn an escaped string into a string:

>>> x = eval("'Capit\\xc3\\xa1n\\n'")
>>> x
'Capit\xc3\xa1n\n'
>>> x[5]
'\xc3'
>>> len(x[5])
1

As you can see, the string "\xc3" has been turned into a single character. This is now an 8-bit string, UTF-8 encoded. To get Unicode:

>>> x.decode('utf-8')
u'Capit\xe1n\n'

Gregg Lind asked: I think there are some pieces missing here: the file f2 contains: hex:

0000000: 4361 7069 745c 7863 335c 7861 316e  Capit\xc3\xa1n

codecs.open('f2','rb', 'utf-8'), for example, reads them all in a separate chars (expected) Is there any way to write to a file in ASCII that would work?

Answer: That depends on what you mean. ASCII can't represent characters > 127. So you need some way to say "the next few characters mean something special" which is what the sequence "\x" does. It says: The next two characters are the code of a single character. "\u" does the same using four characters to encode Unicode up to 0xFFFF (65535).

So you can't directly write Unicode to ASCII (because ASCII simply doesn't contain the same characters). You can write it as string escapes (as in f2); in this case, the file can be represented as ASCII. Or you can write it as UTF-8, in which case, you need an 8-bit safe stream.

Your solution using decode('string-escape') does work, but you must be aware how much memory you use: Three times the amount of using codecs.open().

Remember that a file is just a sequence of bytes with 8 bits. Neither the bits nor the bytes have a meaning. It's you who says "65 means 'A'". Since \xc3\xa1 should become "à" but the computer has no means to know, you must tell it by specifying the encoding which was used when writing the file.

The \x.. sequence is something that's specific to Python. It's not a universal byte escape sequence.

How you actually enter in UTF-8-encoded non-ASCII depends on your OS and/or your editor. Here's how you do it in Windows. For OS X to enter a with an acute accent you can just hit option + E, then A, and almost all text editors in OS X support UTF-8.

I found the most simple approach by changing the default encoding of the whole script to be 'UTF-8':

import sys
reload(sys)
sys.setdefaultencoding('utf8')

any open, print or other statement will just use utf8.

Works at least for Python 2.7.9.

Thx goes to https://markhneedham.com/blog/2015/05/21/python-unicodeencodeerror-ascii-codec-cant-encode-character-uxfc-in-position-11-ordinal-not-in-range128/ (look at the end).