Is there any way to tinker with the iPhone SDK on a Windows machine? Are there plans for an iPhone SDK version for Windows?
The only other way I can think of doing this is to run a Mac VM image on a VMWare server running on Windows, although I'm not too sure how legal this is.
It's certainly possible to develop on a Windows machine, in fact, my first application was exclusively developed on the old Dell Precision I had at the time :)
There are three routes;
Other honorable mentions are Flutter, Xamarin and similar; which may at end need actual MacOS device for final build (but you can test on Android till then, as they're cross-platform).
The first route requires modifying (or using a pre-modified) image of Leopard that can be installed on a regular PC. This is not as hard as you would think, although your success/effort ratio will depend upon how closely the hardware in your PC matches that in Mac hardware - e.g. if you're running a Core 2 Duo on an Intel Motherboard, with an NVidia graphics card you are laughing. If you're running an AMD machine or something without SSE3 it gets a little more involved.
If you purchase (or already own) a version of Leopard then this is a gray area since the Leopard EULA states you may only run it on an "Apple Labeled" machine. As many point out if you stick an Apple sticker on your PC you're probably covered.
The second option is more costly. The EULA for the workstation version of Leopard prevents it from being run under emulation and as a result, there's no support in VMWare for this. Leopard server, however, CAN be run under emulation and can be used for desktop purposes. Leopard server and VMWare are expensive, however.
If you're interested in option 1) I would suggest starting at Insanelymac and reading the OSx86 sections.
I do think you should consider whether the time you will invest is going to be worth the money you will save though. It was for me because I enjoy tinkering with this type of stuff and I started during the early iPhone betas, months before their App Store became available.
Alternatively, you could pick up a low-spec Mac Mini from eBay. You don't need much horsepower to run the SDK and you can always sell it on later if you decide to stop development or buy a better Mac.
Update: You cannot create a Mac OS X Client virtual machine for OS X 10.6 and earlier. Apple does not allow these Client OSes to be virtualized. With Mac OS X 10.7 (Lion) onwards, Apple has changed its licensing agreement in regards to virtualization. Source: VMWare KnowledgeBase
If you have a jailbroken iPhone, you can install the iphone-gcc toolchain onto the iPhone through Cydia and that way you can just compilie the apps on the iPhone. Apps that are developed this way can still be submitted to the App Store.
And although Mr Valdez said it is a grey area (which it is), jailbreaking is incredibly easy and pretty much risk free. Yes, it voids your warrenty but you can just do a restore and they will never know.
The SDK is only available on OS X, forcing you to use a mac. If you don't want to purchase a mac you can either run OS X on a virtual machine on your windows box, or you can install OS X on your PC.
In my experience the virtual machine solution is unusably slow (on a core2 duo laptop with 2G ram). If you feel like trying it search for the torrent. It's probably not worthwhile.
The other option is to install OS X on your PC, commonly referred to as a hackintosh. Hackintoshes work quite well - my friend just sold his mac because his Dell quad core hackintosh was actually much faster than the apple hardware (and cost about 1/3).
Of course both of these options are likely counter to some licensing scheme, so proceed at your own risk.
You can use WinChain
Quoting the project page:
It's the easiest way to build the iPhone toolchain on a Windows XP/Vista computer, which in turn, can take Objective-C source code that you write using their UIKit Headers (included with winChain) and compile it into an application that you can use on your iPhone.
Of course, you can write Objective-C code in notepad or other programs and then move it to a Mac to compile.
But seriously, it depends on whether you are developing official applications to put in App Store or developing applications for jailbroken iPhone. To write official applications, Apple iPhone SDK which requires an Intel Mac seems to be the only practical way. However, there is an unofficial toolchain to write applications for jailbroken iPhones. You can run it on Linux and Windows (using Cygwin).
Check out this:
It is a project that attempts to be able to cross-compile programs written in a variety of source languages to a variety of target languages. One of the initial test cases was to write programs in Java and run them on an iPhone. Watching the video on the site is worthwhile.
With that said, I haven't tried it. The project seems quite beta, and there isn't a lot of activity on their SourceForge site.
You can use Sentenza for make applications for iPhone, on Windows. Tested with success. It's not a solution but a good alternative !
As has been pointed you can attempt to use the WinChain but if you are a newbie coder it won't be easy.
The iPhone SDK will work on Hackintoshes (a normal PC with OS X installed on it). I know as I have one and it does.
So after you go buy an OSX license you could TRY to install it on your PC on a different drive using Boot-132 or one of the other installers like iDeneb. The issue you will have to do a lot of tinkering and things still won't work quite right.
Develop iOS Apps on Windows With Cross-Platform Tools
Cross-platform tools are awesome: you code your app once, and export it to iOS and Android. That could potentially cut your app development time and cost in half. Several cross-platform tools allow you to develop iOS apps on a Windows PC, or allow you to compile the app if there’s a Mac in your local network.
Well, not so fast…
The cross-platform tool ecosystem is very large. On the one side you have complete Integrated Development Environments (IDEs) like Xamarin, that allow you to build cross-platform apps with C#.
The middle ground is covered by tools like PhoneGap, Cordova, Ionic and Appcelerator, that let you build native apps with HTML5 components. The far end includes smaller platforms like React Native that allow you to write native apps with a JavaScript wrapper.
The one thing that stands out for all cross-platform tools is this: they’re not beginner friendly! It’s much easier to get access to a Mac, learn Swift, and build a simple app, than it is to get started with Xamarin.
Most of the cross-platform tools require you to have a basic understanding of programming, compilation options, and the iOS and Android ecosystems. That’s something you don’t really have as a beginner developer!
Having said that, let’s look at a couple of options:
If you’re familiar with Windows-based development tools and IDEs, and if you already know how to code, it’s worthwhile to check out Xamarin. With Xamarin you code apps in C#, for multiple platforms, using the Mono and MonoTouch frameworks. If you’re familiar with web-based development, check out PhoneGap or Ionic. You’ll feel right at home with HTML 5, CSS and JavaScript. Don’t forget: a native app works different than a website… If you’re familiar with JavaScript, or if you’d rather learn to code JavaScript than Swift, check out React Native. With React Native you can code native apps for iOS and Android using a “wrapper”. Always deliberately choose for cross-platform tools because it’s a smart option, not because you think a native platform language is bad. The fact that one option isn’t right, doesn’t immediately make another option smarter!
If you don’t want to join the proprietary closed Apple universe, don’t forget that many cross-platform tools are operated by equally evil companies like Google, Facebook, Microsoft, Adobe and Amazon.
An often heard argument against cross-platform tools is that they offer limited access to and support for smartphone hardware, and are less “snappy” than their native counterparts. Keep in mind that any cross-platform tool will require you to write platform-specific code at one point, especially if you want to code custom features.
I use Flutter. I develop on my Windows machine and test on an Android emulator. When I'm ready to test on iOS, I run the code on macOS. From my experience, a Flutter app runs exactly the same on Android and iOS. If you don't have a Mac, you can download VirtualBox and install macOS on it. On VirtualBox, macOS runs exactly as it does on a real Mac, and you can build your app on it.
Just make a web app. iOS web apps are:
